FRP High Pressure Pipe
Characteristics of FRP high pressure pipe
1. It has excellent mechanical& physical properties,light weight,high strength,convenient transportation and installation.
2. Good corrosion resistant,the formation in one time,it can be used under severe environmental condition,and its service life can be up to 50 years.
3. Good low temperature resistant,it can be used under the environmental condition of -45℃ -- 120℃.
4. Good high pressure resistant,the range of the normal operation pressure is: 2.5MPa - 32Mpa.
5. Smooth inner surface,its roughness coefficient is 0.0084,good conveying,and no fouling,no secondary pollution,decrease the cost of the running & maintenance.
6. The length of one piece pipe is 12m，less joint,less leakage point.
Specification
Diameter: 3/2" (38mm) - 8" (200mm)
Pressure class: 2.5MPa - 32MPa
Length of single pipe: < DN250 L=6m、≥DN250 L= 12m,The length also can be made according to the requirements of the use.
Connection type
Adopt screw connection,it is simple & fast,high strength and good reliability.
Application of FRP high pressure pipe in oilfield
Pipeline: Brine,water and crude oil conveying pipeline,polymer solution conveying pipeline,crude oil and natural gas conveying pipeline,industrial sewage and waste water treatment pipeline,etc.
Pipe for well: living well (oil,gas,terrestrial heat water),treatment well (brine,chemical sewage,waste water),affusion well (brine,CO2,polymer).
