DN≤600 will be contacted mold, others will be mitered elbow.
|
DN (mm） |
R (mm） |
0.6MPa | 1.0MPa | 1.6MPa |
| TH(mm） | TH(mm） | TH(mm） | ||
| 10 | 15 | 5.5 | 5.5 | 5.5 |
| 15 | 22.5 | 5.5 | 5.5 | 5.5 |
| 20 | 30 | 5.5 | 5.5 | 5.5 |
| 25 | 37.5 | 5.5 | 5.5 | 5.5 |
| 32 | 48 | 5.5 | 5.5 | 5.5 |
| 40 | 60 | 5.5 | 5.5 | 5.5 |
| 50 | 75 | 5.5 | 5.5 | 5.5 |
| 65 | 97.5 | 5.5 | 5.5 | 5.5 |
| 80 | 120 | 5.5 | 5.5 | 5.5 |
| 100 | 150 | 5.5 | 5.5 | 9.4 |
| 125 | 187.5 | 5.5 | 5.5 | 9.4 |
| 150 | 225 | 5.5 | 9.4 | 10.9 |
| 200 | 300 | 7.1 | 9.8 | 12.9 |
| 250 | 375 | 9.4 | 10.4 | 15.2 |
| 300 | 450 | 9.4 | 13.3 | 17.3 |
| 350 | 525 | 9.8 | 15.8 | 19.6 |
| 400 | 600 | 10.6 | 16.8 | 23.8 |
| 450 | 675 | 13 | 18.3 | 26.2 |
| 500 | 750 | 13.7 | 18.9 | 26.2 |
| 600 | 900 | 16.2 | 22.7 | 27.6 |
| 700 | 1050 | 18.6 | 24.5 | 37.2 |
| 800 | 1200 | 18.6 | 28.3 | 43.8 |
| 900 | 1350 | 20 | 30.2 | 48.3 |
| 1000 | 1500 | 22.9 | 33.2 | 52.6 |
