News-Hengshui Jiubo Composites

+86-13303314492

Home > News

192018-06

Construction of SMC Septic tank (2)
After the location of SMC Septic tank is selected and the size of the cesspool is determined, the size is measured with lime wire. The bricks should be set aside when laying the thread, generally 150mm will be released from each thread. And then dig the hole by the line, ...
+
122018-06

Comparison of FRP Pipe and Steel Pipe (1)
The steel pipe is a kind of traditional pipe, which is welded after the steel plate is spirally wound into a cylindrical shape. ...
+
102018-06

Comparison of FRP septic tank with conventional STS
Unique ring to dense corrugated structure design, compressive strength, impact strength, for example, cylinder, sphere arch type intensity increase several times, without any its heald reinforcement measures can satisfy different use. ...
+
072018-06

Construction of SMC Septic tank (1)
There are two types of SMC Septic tank structure commonly used in our province, one is brick structure, the other is precast reinforced concrete structure. SMC Septic tank of prefabricated reinforced concrete structure has been commercialized and can be assembled as required. This section mainly introduces the construction ...
+
042018-06

FRP winding machine production line
All major process data of the FRP winding machine production line can be input by the keyboard and displayed on the screen, so that the operator can more easily apply and manage the winding parameter overview: This series of winding machine is a dedicated unit of glass fiber filament winding pipes and tanks. Easy adjustment ...
+
312018-05

FRP mold design points
The FRP mold press process is a new type of composite material molding method, and the mold is the basis of the SMC process. Good product quality is ensured by a stable mold. Therefore, in the design work of the SMC molding process, the design of the mold is more important. ...
+
272018-05

Production defects and remedial measures of FRP filament process machine
There is no perfect thing in the world, as is the FRP filament process machine. In the use of the FRP filament process machine, defects sometimes occur in the production process of products. Today, analyze the causes of these defects and their countermeasures: ...
+
242018-05

What is the automation performance of frp filament winding machine?
The degree of automation of frp filament winding machine equipment is mainly reflected in the following two points: ...
+
222018-05

How to save water in fiberglass digesters
The FRP biogas tank can temporarily store excreta and allow it to initially decompose in the tank, thereby reducing the solid content in the discharged effluent. ...
+
172018-05

Technical Analysis of electrolytic cell
The principle of electrolytic cell, electrolytic definition, under the action of the current, the electrolyte occurs in the oxidation and reduction processes on the two electrodes respectively. The energy conversion form, the electrical energy is converted into chemical energy, the electrolytic energy, constitutes the condi ...
+
152018-05

Frp filament winding machine is the driving force for the development of environmental technology
How does frp filament winding machine accessory help the product? Let's take a look at the following points to share ...
+
102018-05

Prevent the aging of glass steel septic tanks
FRP septic tank is the most ideal environment-friendly and energy-saving product today. As long as anyone who has used this product has been praised, it is said that the product is easy to install, fast, and can be 30 times more efficient than traditional brick septic tanks, and even higher. ...
+

Home pagePrevious page1314151617Next pageLast page

CONTACT US

Plant address:No. 1056 South Yingbin Street, Jizhou district, Hengshui City, Hebei 053200 China
Mobile: +86-13303314492
Whatsapp: +86-13303314492
E-mail: bella@aldfrp.com

MESSAGE

Copyright Hebei Aoliande Chemical Equipment Co.，LTD. All rights reserved.

Online Service×

+86-13303314492

+86-13303314492

bella@aldfrp.com